Clip Point D Guard Bowie Knife

Here’s a Confederate D Handle knife that’s been in my collection for quiet some time. It doesn’t get as much respect as some of the other D-handle knives due to its size, but it would have been the perfect knife for a foot soldier to carry since it was small and lighter in weight then most of the heavy and clumsy D-Handles.
The overall size of the knife is 15 ½” long, with the handle measuring 5” and the blade measuring 10 ½”. This Clip point Knife has a 2 ¾” false edge and the blade is 1 ½” wide. The Blacksmith kept the natural sweep of the blade which occurs when the edge is forged.
It’s my guess this knife was made from an old file, even though there are no teeth marks on the blade. It’s pretty simplistic in nature but still very well made. The Guard is thick at the pommel where it’s fastened to the handle (about 1/8”) but the area of the quillon where the blade meets the handle is very thin, measuring about 1/16” or thinner. Proof that the D-Handle was crafted with a hammer by a blacksmith or mechanic.
The blade and the guard both have a nice blackened patina to them however the ferrule at the base of the handle appears to be pewter, which may be the neatest feature of the knife. The scabbard is long gone to time but it’s my opinion it would have been leather or pigs hide.
Well there you have it another Confederate D-Handle Bowie Knife. If you have any questions about this knife or any of the other weapons in the Civil War Arsenal feel free to email me at civilwararsenal@yahoo.com attn: Gene West

Petersburg Virginia, Civil War Battlefield

Virginia and Civil War equals Battlefields, and I love it. The Petersburg National Battlefield is a historic landmark for Civil War geeks and American history fans to explore. So many monuments, exhibits, walking paths, you can spend days there exploring.

The siege of Petersburg lasted nearly 10 long months. From June of 1864 thru April of 1865 the largely out numbered Confederate Army lead by General Beauregard protected Richmond from capture with intricate defensive lines of trenches and earthworks throughout the high ground.

With nearly 70,000 casualties during the siege ( 42,000 Union and 28,000 Confederate) on June 18th 1864 the 1st Maine Heavy Artillery sustained the largest loses of any regiment as 850 men advanced across a cornfield to capture a Confederate line. With no Union troops to protect there flanks the Confederates opened fire mowing down 632 Union troops in a mere 10 minutes, unfortunately for the Maine regiment not one man reached the Confederate line.

But the Battle of the Crater is what Petersburg is mostly known for. The 48th Pennsylvania Infantry tunneled a mine shaft 500 feet long, under the area where the Confederate line was. On July 30, 1864 they packed cavities under the Confederate line with 8000 pounds of explosives and ignited the fuse. The blast killed more then 300 South Carolinians and created a large gap measuring 170” long, 110” wide, 30” deep in the Confederate line.

Brigadier General William Mahone is largely credited with rallying the Confederate troops, counter attacking the Union troops as they rushed into the crater, he would later say it was like a “turkey shoot”. The Union attack failed due to poor planning and leadership. Union Casualties were staggering, with 504 killed, 1881 wounded 1413 missing or captured for a total of 3,798 versus Confederate casualties of 1491 with 361 killed, 727 wounded and 403 missing or captured. Many of the Union losses were from Ferrero’s United States Colored Troops. Major General Ambrose Burnside was relieved of his command shortly after his role in the debacle.

Cold Harbor Battlefield

Coming up from Florida in May of this year my wife and I stopped at a bunch of Civil War Battlefields in the Richmond Virginia area. Petersburg, The Seven Days Battle at Gaines Mill, Totopotomoy Creek, Cold Harbor and the Chandler house at Fairfield, Guinea Station the place where Stonewall Jackson Died are just a few of the American landmarks we visited.

With so much to explore I was in Civil War exploration overload. I mean there was just so much to see and do I was just in my glory. I would say I was a bit taken by the lack of resources that have been used to maintain these historic landmarks but I guess it’s typical of American Politicians (with the allocation of money)not to care about our history especially in the South, it’s just not politically correct these days. Bummer.

So anyway I’m sure you have better things to do then listen to me drone on about my opinions when it comes to politics, so let’s move on.

If you haven’t been to the Cold Harbor Battlefield you have to drop what your doing and go NOW, I mean it. It has some of the best preserved entrenchments any where. The Confederate trenches are soooooo cool. There are paths that follow the trenches that allow you to understand the topography of the land. Understanding this allows you to see just what a dominate defensive position the Confederate Army had and why it was such an overwhelming victory for the South.

I must warn you to NOT WALK THROUGH THE TRENCHES, they are American historic jewels and the more there disturbed the more they erode. Plus the park rangers will give you a hard time.

My Gr.Gr. grandfather Richard Jones and his brother Thomas Jones served in Co. C, 38th Battalion Virginias Light Artillery part of Read Battalion. On June 2nd and 3 rd 1864, both brothers were positioned with there battery at the spearhead of the Northern assault. Fortunately Richard survived the campaign without incident, Thomas on the other hand wasn’t so fortunate. He was WIA, June, 3rd 1864 with a flesh wound to the right leg and spent the rest of the war in and out of Chimborazo and Stuart Hospitals in Richmond Virginia.

For anyone wanting to read more about this Robert H. Moore is the author of “The Richmond Fayette, Hampden, Thomas, and Blounts Lynchburg Artillery” this is a limited edition book out of print these days but still available through specialty book stores online.

Confederate Retractable Pikes

For the longest time I’ve been wanting and waiting for a Retractable Pike to become available that had all the characteristics that I demand for my collection. I’ve seen a few over the past years that drew my interest and curiosity but it wasn’t until I examined them that I realized they didn’t meet my expectations. So year after year, show after show it’s been one of those Southern Weapons that I’ve been on the hunt for but never could find that ONE that I could call mine.

As luck would have it I was on one of the more prominent Civil War Dealers web sites and low and behold their it was in all its glory, the retractable pike that said “I’m yours, buy me”. Interestingly enough there wasn’t just one pike to choose from there we’re two. One had a lighter wood finish, that may have been cleaned at some time and it had a shorter blade by about 2 inches. Then their was the pike that called to me.

This pike has a beautiful blackened wood and metal finish. Unlike so many of the pikes that I’ve handled over the years that always seemed to be missing a part or two or had cracks in the wood or a damaged blade, this pike was just stunning it wasn’t missing anything. It had all its hardware and a longer blade then most, which really drew my curiosity.

The pike has a spear point blade that’s extremely sharp. The shaft is six foot 1 inch long when the blade is in the closed position, the blade is 16 inches long and the pike has an overall length of 7 foot 5 inches when the blade is in the opened position.

The retractable pike was invented by Reverend Doctor Graves, a Methodist minister originally from Vermont, living in Georgia at the time of the war. Probably made in Macon Georgia these pikes were originally designed to have a spring that would eject the blade (kinda like a large stiletto or switchblade) to the open position however the South didn’t have the capabilities of making such a spring so they were made without them. The user would slide the bolt on the side to manually move the blade to open and closed position.

Georgia Governor Joseph Brown gave an address in February, 1862 appealing to the blacksmiths and mechanics throughout the state to show there patriotism and turn out ten thousand pikes to be six feet long and have an eighteen inch blade.

Suggesting that armies should be armed with pikes and a long heavy side knives and when advancing columns come within reach of the balls, let them move in double time and rush with terrible impetuosity into the lines of the enemy.

Governor Brown stated in his address that long range guns sometimes fail to fire and waste hundreds of balls to one that takes effect, but the short range pike and terrible knife when brought within their proper range, and wielded by a stalwarts patriots arm never fail to fire and never waste a single load.

There’s no doubt Gov. Browns intentions were good but I’m not fighting anyone who has a gun that shots lead with an accuracy of 500 yards if I’m only armed with a 6 foot pike. I Believe a Georgia Regiment almost committed mutiny when told they would have to fight with such a weapon. Can’t say I blame them.

So there you have it, yet another fine example of a Southern Edged Weapon. I hope you enjoy the photos if you have any questions about this weapon or any of the other weapons here at the Civil War Arsenal I can be reached at civilwararsenal@yahoo.com attn: Eugene West

Confederate, Joseph Brown Georgia Pike

The outbreak of the war left the the Southern states without much of the resources there Northern counterparts had. Rifles, pistols, swords, uniforms and least we forget people were just some of the needs lacking to fight a war. Because of this the ingenuity of the Southern war machine, i.e. politicians, blacksmiths, mechanics and farmers would have to think outside the box.

In February of 1862, Georgia Governor Joseph Brown gave an address to mechanics throughout the state.

Executive Department,
Milledgeville, Georgia,
February 20th, 1862.

To the Mechanics of Georgia:

The late reverses which have attended our arms, show the absolute necessity of renewed energy and determination on our part. We are left to choose between freedom at the end of a desperate and heroic struggle and submission to tyranny, followed by the most abject and degraded slavery to which a patriotic and generous people were ever exposed. Surely we can not hesitate. Independence or death should be the watchword and reply of every freeborn son of the South. Our enemies have vastly superior numbers and greatly the advantage in the quantity and quality of their arms. Including those, however, which have and will be imported, in spite of the blockade, we have guns enough in the Confederacy to arm a very large force, but not enough for all the troops which have been and must be called to the field. What shall be done in this emergency? I answer: Use the “Georgia Pike” with six feet staff, and the side knife eighteen inches blade, weighing about three pounds.

Let every army have a large reserve, armed with a good pike, and a long heavy side knife, to be brought upon the field, with a shout for victory, when the contending forced are much exhausted, or when the time comes for the charge of bayonets. When the advancing columns come within reach of the balls, let them move in double quick time and rush with terrible impetuosity into the lines of the enemy. Hand to hand, the pike has vastly the advantage of the bayonet, and those having the bayonet, which is itself but a crooked pike, with shorter staff, must retreat before it. When the retreat commences, let the pursuit be rapid, and if the enemy throw down their guns and are likely to outrun us, if need be, throw down the pike and keep close at their heels with the knife, till each man has hewed down, at least, one of his adversaries.

Had five thousand reserves thus armed and well trained to the use of these terrible weapons been brought to the charge at the proper time, who can say that the victory would not have been ours at Fort Donaldson?

But it was probably important that I state here the use to be made of that which I wish you to manufacture. I have already a considerable number of these pikes and knives, but I desire, within the next month, ten thousand more of each. I must have them; and I appeal to you, as one of the most patriotic classes of our fellow citizens, to make them for me immediately. I trust every mechanic, who has the means of turning them out rapidly, and the owner of every machine shop in this State, will at once lay aside, as far as possible, all other business and appropriate a month or two to the relief of the country in this emergency. Each workman who has the means of turning them out in large numbers without delay will be supplied with a proper pattern by application at the Ordinance Office at Milledgeville.

Appealing to your patriotism as a class and to your interest as citizens, whose all is at stake in the great contest in which we are engaged, I ask an immediate response.

In ancient times, that nation, it is said, usually extended its conquests furthest whose arms were shortest. Long range guns sometimes fail to fire and waste an hundred balls to one that takes effect; but the short range pike and the terrible knife, when brought within their proper range, ( as they can be almost in a moment) and wielded by a stalwart patriot’s arm, never fail to fire and never waste a single load.

I am, very respectfully, your fellow citizen,

After reading such a decree you can better understand the sentiment and feelings of the Southerner at the time of the war. The institutions have dumbed down the facts since the War of Northern Aggression with political correctness. But it’s obvious that the Southerner was defending his freedoms, they were fighting the second revolution the same fight there Grandfathers had fought some 80 years earlier against the British.

Calling for mechanics throughout the state to make six foot staffs with eighteen inch blades shows just how desperate the Southern war machine was. Still thinking in terms of a Napoleonic type war, where armies lined up in open fields with smooth bore rifles and blades of all types believing a Divine Spirit was on there side and would protect them the sorrows of death.

There Northern counterparts were manufacturing state of the art breech loading repeating carbines and rifles, rifled cannons that could launch explosive projectiles accurately for miles, building the largest wartime Navy the world had ever seen.

Seems hard to believe that these two countries/armies could have been fighting against each other with such a difference in the types of weapons they hoped would bring them victory. It’s a credit to the South that the war lasted as long as it did, just goes to show how difficult it is to strip someone of there freedom without them fighting back like a caged rabbit dog, after all they were willing to use pikes against men with guns, sounds crazy too me.

Which brings me to the next weapon in the Civil War Arsenal. This Joseph Brown Georgia Pike has a spear point blade that measures 12 ¼” long, the overall length of the pike is 8’ & ¼” from the butt to the point of the blade. It has no cracks in the wood shaft and no makers marks, which is not uncommon for these pikes. The brass butt collar at the base of the shaft is still in place, which is generally lost on most examples. The wood shaft has what appears to be the markings ( indentations ) of rope that was once wrapped around it. I’ve seen this before on other pikes and it’s my opinion that the shaft was wrapped with rope to better grasp for lungeing forward. However I’ve never seen a pike with the rope still in place. This pike was purchased from Sam, at the Horse Soldiers store in Gettysburg Pa. I’m guessing due to its great condition it was a war souvenir shipped north after the war and displayed at a G.A.R hall, just an educated guess.

So there you have it another fine example of a Southern Edged Weapon in the ever growing Civil War Arsenal, a Confederate Georgia Pike. If you have any questions about this weapon feel free to contact me. And if you have a civil war weapon that you’d like know more about or perhaps you’d like to sell feel free to contact me at civilwararsenal@yahoo.com , attn: Eugene West. Thanks for stopping by.

Civil War Guns

Sitting around the house today not knowing what to do, outside the snow is coming down and there calling this the storm of the century with up to 2 feet of snow and 50 MPH winds expected, sounds cold to me….

Anyway I decided to take some photos of my history room, a.k.a. the “Civil War Arsenal”. As you can see many of my antique weapons are displayed throughout the room. I recently had a carpenter build the racks that the rifles are mounted on, all in all I think the racks came out pretty nice and compliment the rifles and corresponding bayonets.

You’ll also notice some D-Handle, Side Knives, Pikes and Artillery Swords displayed as well. Its my opinion that these weapons should be displayed so friends and family can see and handle them. I don’t quite get the fun in collecting antique guns and swords then putting them in the safe or some out of the way place where no one can appreciate them. But thats just my opinion and you know what they say about opinions.

Also scattered throughout the room are a number of paintings, historical photos, bronze castings and dozens of other historical items. You’ll notice that I am a big “John Paul Strain” fan he is perhaps one of the best artist in his field I have a bunch of his paintings. I also have some of “Karl Anderson’s” sculptures, he’s a less know artist then John however just as good and I believe the best in his field, especially when it comes to historical accuracy.

Well there you have it, another story that no one will read. Just Kidding…. If you have any questions about this post or any of the weapons in the “Civil War Arsenal” feel free to contact me at civilwararsenal@yahoo.com attn: Gene West

Kerr Patent, .44 Caliber, Percussion Revolver

Imported by the Confederate Government, the Kerr Revolver was made by the London Armory Company in London England, approximately 7,500 were imported by the South with a serial number range from about 3000 – 10000, interestingly enough the U.S. Government imported 16 revolvers in 1861.

The revolver was made in both .36 and .44 calibers with a double action version released in 1863, however the Confederacy only purchased single action .44 caliber revolvers. The overall length is 10 ¾” with a 5 ½” barrel that has London proof marks. The lock plate is marked London Armory as well as the left side of the frame. The serial number is located on the cylinder and the bottom right side of the frame under the cylinder compartment.

Many, but not all of the Confederate Kerr Revolvers are marked with the C/S import proof/inspection stamp of John Southgate, Chief CS viewer/proofer for the Confederacy in England, with the JS/Anchor demarcation.

Which brings me to the next example in the Civil War Arsenal. This relic condition revolver is a true Southern classic. I consider it relic condition due to the pitting on the lock plate, hammer that doesn’t stay in the cocked position all the time and the poor condition of the wood hand. It seems to me at one time or another it must have been dropped or crushed causing a crack to the wood handle, some damage to the checking on the handle and the worst part of the damage is a small portion of wood is missing from the area of the handle where the JS/anchor demarcation is located. It’s still clearly visible but the top portion of the JS is missing, it’s still a bummer (the damage that is).

This Revolver has a serial number of 6605 on the cylinder as well as the frame which puts it in the range of confederate purchases. Along with the JS/Anchor demarcation assures us this is a Southern Imported Revolver.

I first saw this weapon a couple of years ago on a web site of one of the more prominent Civil War dealers, I called him up and negotiated a price. The photos that he used to advertise the revolver were not the best quality and did not show the damage to the handle. I trusted his reputation and that he would alert me to any condition issues (he didn’t). So I probably paid more then I should have for this weapon due to the damage on the handle but I guess it’s all part of the learning experience. I’ll be certain to be more careful in the future and not trust the reputations of dealers.

So there you have it another Confederate beauty and another addition to the Civil War Arsenal. If you have any questions about this Revolver or any of the weapons in my Arsenal fell free to contact me at civilwararsenal@yahoo.com attn Gene West.

Confederate, Tennessee Side Knife and Rig

This is a great example of a Side knife that a Confederate Infantrymen would have carried throughout the War Between the States. Small and light enough to be worn day and night. Many of the large D Handle knives were way too big, clumsy and heavy to be totted around day in and day out, many were tossed to the side of the road in favor of a lighter and more useful knife, such as this.

This knife is extra neat since it still has its wood lined scabbard and belt rig. Both of these pieces are hand sewed which was common for most Confederate rigging. The Spear Point blade is single edged with a sharpened 2 3/4″ top edge. The overall length of the knife is 14 ¾”, with the blade measuring 10 ¼ “and width 1 3/8”.

This knife was formally in the collection of Lee Hadaway, who is one of the leading experts in Confederate Edged Weapons and author of the “Confederate Bowie Knife Guide” which this Knife and Rig is published in. This knife is also published in “Confederate Bowie Knives” on page 253 as a Tennessee Side Knife.

I hope you enjoy the photos and if you have any questions about this knife please feel free to contact me at genx1969@yahoo.com attn. Gene West

1863 Dickson, Nelson & Co. Rifle

With the outbreak of the war in 1861, William Dickson (a planter from Alabama), Owen Nelson (an attorney from Tuscumbia) and Lewis Sadler (a physician) started the Shakanoosa Arms Company. Operations began at there first plant in Buzzard Roost, Colbert County, Alabama. A $7000.00 advance for funding to manufacture U.S. Model 1841 “Mississippi” type rifles for the state of Alabama was received.

In the summer of 1862 the Shakanoosa Arms Company was forced to move its operation to Rome Georgia in fear of the nearing Union forces, after a while at this location the armory again suffered a setback when there building was destroyed by fire. Again they were forced to move to Adairsville, Georgia under the name Dickson, Nelson & Company and in August 1863, Union advances forced them have to move further south to Macon, Georgia. Finally in February of 1864 the company moved to its final home in Dawson, Georgia.

Rifles under the supervision of inspecting officer, Captain B.J. McCormick were to conform to the U.S. Model 1841 Mississippi pattern, having 33” barrels of .58 caliber and stocks 48” in length. Brass hardware on these rifles included a straight butt plate, two piece trigger guard, barrel bands and nose cap with many of these parts having casting flaws throughout and some having reddish color indicating high copper content.

It’s estimated that about 3600 rifles were manufactured from 1862 thru 1865, but there’s no documentation to prove that. It’s the authors opinion that this number is way to high for the number of surviving rifles. Most of the surviving specimens are dated 1864 and 1865.

“Flaydermans Guide to Antique American Firearms” states that there are only 3 recorded 1863 dated lockplates. Two of these lockplates are not attached and the other is on a two-band rifle.

Which brings me to the newest member in the “Civil War Arsenals” ever growing collection. This 1863 Dickson, Nelson Rifle is truly a rare Southern Beauty. Based on Flaydermans Guide, this new addition is the rarest example of any weapon the Arsenal has to offer, making it the forth known 63 lockplate and only the second one attached to a stock.

I first saw this rifle a couple years ago at a gun show in Gettysburg, the fellow that was selling it had a large collection of Southern Weapons. I purchased another from him at the time (63 Fayetteville) that is one of the nicest examples in my collection. I had made him an offer on this rifle but he wasn’t willing to negotiate off his price. Fast forward two years and I ran into him at another Civil War Show and it turned out he still had the rifle. So after a little bit of haggling we settled on a price and I became the new owner of this 1863 Dickson, Nelson Rifle.

This rifle is in very good condition considering its history. The lock plate is dated 1863 ALA. behind the hammer which means the rifle was manufactured through contract for the state of Alabama. Forward the hammer is stamped DICKSON, NELSON & CO. and C.S. on the bottom line. The upper left surface of the barrel is date stamped ALA. 1863/65 (can’t really tell due to pitting)and the under surface of the barrel is stamped with a “windmill” or “Maltese Cross”armorers mark, attributed to Nathaniel D. Cross an inspector at the Selma Arsenal. The rear sight is fixed and located 3 1/8” forward the barrels breech. All of the brass hardware has casting flaws and lots of great patina. The barrel shows three broad lands and grooves and the ram rod appears to be original with some pitting but still showing its thread. The stock is in extremely good condition with the exception of what appears to be bug/termite damage on the left side by the butt plate, but it’s my opinion that this damage was original to the weapon when manufactured and not after the war while in storage, but it’s only my opinion. Included with the purchase of this weapon was an original confederate linen sling which compliments the rifle well based on its condition. I’m not certain it’s original to the rifle but based on the sling folds it’s been on the rifle for a long time.

So there you have it, yet another addition to the Civil War Arsenal. I hope you enjoy the photos, if you have any questions or thoughts on this rifle feel free to contact me at civilwararsenal@yahoo.com attn: Eugene West, hope to hear from you soon

1865 Spencer Repeating Carbine

The Civil War Arsenal has been focusing mostly on Confederate Weapons, the author has been crazed by these Southern beauties. But the Arsenal is full of other war time weapons that have been praised by the men of their time. The one we’ll showcase in this article is the 1865 Spencer Carbine.

The Spencer is considered the first successful repeating carbine to fire a metallic cartridge. Men from both the North and South agreed that the Spencer had a hand in turning the tides of the War in favor of the North. The inventor of the weapon was Christopher Miner Spencer. Born in Manchester Connecticut at the age of 19 was issued U.S Patent # 27,393 for a tubular magazine cartridge firearm in both carbine and rifle design.

In July of 1861 the U.S Government (Navy) placed there first order for 700 Spencer rifles with sword bayonets and 70,000 metallic cartridges, which were issued to Mississippi flotilla gunboats. At the battle of Gettysburg a portion of General Custer’s Michigan Brigade were armed with Spencer rifles which they used against Jeb Stuart’s Calvary with tremendous success.

Two versions of the Spencer were manufactured by both the Burnside Rifle Company (30,496) and the Boston Rifle Factory that was owned and operated by Christopher Spencer (64,685) for a total of 95,181 weapons and 58,238,924 cartridges. The 56-52 and 56-50 rim fire metallic cartridges were used in the Spencer Carbines. The 56 stands for the Spencer cartridge and the 52/50 stand for the bore diameter. The Burnside shot 50 caliber while the Spencer shot 52 caliber.

The Spencer carbine manufactured in Boston Mass. has an overall length of 39 inches and weights 8 pounds 4 ounces, case hardened lock, two piece black walnut stock with the butt stock being 15 inches. The barrels are blued and 22 inches long (however this M-1865 Spencer has a 20″ barrel) a brass blade front sight and a single leaf rear V notched rear sight graduated to 800 yards.

A tubular magazine located in the butt stock to feed the rim fire cartridge, capable of holding 7 copper cartridges were pushed forward to the receiver by a coil spring. To fire the Spencer carbine the operating lever is lowered ejecting the previously fired cartridge bringing the next cartridge into position, the hammer is then cocked and the carbine is ready for firing. Seven cartridges could be fired in about 10 seconds.

In the latter part of the war Edward M. Stabler of Maryland invented the Stabler Cut-Off Device. It prevented the cartridge from feeding the magazine to the receiver by limiting the lowering of the breech block. The carbine could then be used as a single shot weapon. A few of the carbines manufactured by the Spencer factory, plus 19,000 of the 30,496 of the Burnside Spencers were equipped with the Stabler Cut-Off Device.

The Blakeslee cartridge box received U.S. Patent # 45,469 on December 20, 1864, invented by Colonel Eratus Blakeslee of the 1st Connecticut Voluntary Calvary. The cartridge box was capable of carrying 10 to 13 tinned tubes containing seven Spencer cartridges each, giving Union Calvary men an additional 70 to 91 cartridges at there finger tips.

At the 1865-66 carbine test trials, the Spencer was rated the best arm of its kind offered for use. The Spencer carbine was carried by Custer’s 7th Calvary at the Battle of Little Bighorn and was used until it was replaced by adoption of the 45-70 trapdoor Springfield in 1873.

After the war demand for the Spencer declined and the Company went out of business in September 12, 1869. Its assets were purchased at auction by the Winchester Repeating Arms Company in 1870.

Which brings us to this fine example of an 1865 Spencer Repeating Carbine which has the Stabler Cut-Off Device. The stock is in excellent condition, the receiver still has signs of bluing and the barrel and all hardware having a nice brown patina. I don’t normally shot any of my antique weapons but I purchased preloaded cartridges from Dixie Gun Works and had a blast shooting this weapon at targets of 25 yards, the weapon shot flawlessly hitting the target most of the times. Ironically I am not a good shot but the Spencer Carbine made me a Marksmen.

I must offer credit and thanks to author John D. McAulay for his book Carbines of the Civil War 1861-1865 for many of the facts written in this article are a result of his hard work and research.