Confederate Bridle Cutter Pike, Louis Froelich

During the war on Northern aggression the C.S.A Arms Factory in Wilmington North Carolina had contracts to manufacture two types of lances. The first was a straight steel blade, 18” long X 2” at its widest point. Secured to the hickory shaft with a 1” iron pin that was flattened at both ends. The hickory shaft measured approximately 7’ – 9” long with an iron collar at the bottom end of the shaft that was held in place with an iron pin.

The second type of lance was similar to the first with the addition of a sickle shaped bridle cutter. The sickle and the blade are actually two different pieces held in place with the 6 ¾” iron collar. This primitive type of weapon would have been used against Calvary troops charging artillery batteries.

If the user could hook the sickle portion of the blade around the leather bridle portion of the charging Calvary Horsemen they would cut the bridle leaving the rider of the horse with no control and vulnerable to attack from foot soldiers. I’m not certain of any documented use of these weapons but it doesn’t mean they weren’t used in rare instances. By the time of the American Civl War, most of these types of Napoleonic weapons were obsolete…..remember Calvary-men had breach loading carbines such as Sharps and Spencer’s that could shoot up to 7 shots before reloading.

Exactly how many lances and bridle cutters were made by Louis Froelich and Company is not known, but extant examples are extremely rare. An article in the “Home Industry” April 28th, 1864 edition of the Wilmington Journal reported that Froelich manufactured 3,700 lance spears during the war. It’s not clear how many of the 3,700 were bridle cutters but it’s the authors opinion that it’s few at best. As of this blog post there are only 7 Louis Froelich bridle cutters know to exist.

Which brings us to the newest weapon in the Civil War Arsenal. Over the past year or so I’ve been on a mission to grow my collection of Confederate poles of all types….Pikes, Lances, Bridle Cutters and Flagstaffs. They make great conversation pieces and display nicely in my War Room/Arsenal. Most collectors like the guns and edged weapons (I do too) but don’t normally collect pole type weapons. Probably because there hard to display, due to there size and even though they were made during the war not many were used during in battle……and many collectors want weapons that have provenance, not pieces that sat in arsenals waiting to be used.

This Bridle Cutter is in great condition, it’s hickory shaft has no cracks and the iron has a nice darkened patina to it. It even has its iron collar at its base which is usually missing on other pikes and lances. Just another great piece of American history with North Carolina provenance, you gotta love the South.

I’d like to thank John W. McAden, Jr. and Chris E. Fonvielle, Jr., there book “Louis Froelich Arms-Maker to the Confederacy”. Without collectors and enthusiasts like them we would know little about the history of pieces like this.

If you have any questions about this Bridle Cutter or any of the other pieces in the Civil War Arsenal feel free to contact me at civilwararsenal@yahoo.com attn: Gene West

1863 Richmond Carbine

The newest weapon in the ever growing Civil War Arsenal is an 1863 Richmond Carbine that is in excellent condition with all of its accoutrements still in tact. This is not the only Richmond Carbine I own nor is it the only 63 Carbine in my Arsenal, however it is my first complete Richmond Carbine with everything in place…I.E. pinched sight, ram rod, rear sight, swivel slings,etc…..another neat feature of this Southern weapon is that it’s 100% Southern made.

Most Richmond Armory made weapons were assembled with at least some parts from battlefield pickups and or parts that were confiscated during the 1861 raid of the Harper’s Ferry Armory.

As we inspect the cavity under the lock plate we can clearly see that there is no primer cut finger feeds that would be in place if the stock was manufactured at the Harper’s Ferry Armory. The C.S. Armory, Richmond would eliminate unnecessary machining operations from the stock leaving lock plates cavity central element in the shape of a “mules foot”.

The date on the Richmond lock plate has a “die break in the lower left portion of the 8” which is thought to be a stress flaw in the stamping process during the month of October 1863. During that month the Richmond Armory assembled 300 Carbines.

I love the look of the dark “blackened” wood and hardware especially with the brass butt plate and nose cap. Unlike most Confederate weapons you’ll see these days with missing and damaged parts, probably because most of the better quality weapons are in museums and private collections, this carbine is complete in every way.

This makes 7 Richmond Carbines I currently own. I can’t say any one is my favorite, since there all my favorites for different reasons. But I do tend to favor the newest members of my collection until I purchase the next one, lol….

Hope you enjoy the photos and if you have any questions about this Richmond or any of the other weapons in the Civil War Arsenal please contact me at civilwararsenal@yahoo.com attn: Gene West

Kenansville D-Guard Artillery Short Sword

The following Confederate Short Sword is attributed to Louis Froelich of Wilmington North Carolina. Mr. Froelich born 1817 in Bavaria (Germany), he and his family soon traveled to Liverpool England where he worked as a mechanic/machinist. June of 1860 he and his family leave Liverpool for New York. By the spring of 1861 he and his family are living in Wilmington North Carolina.

At the start of the War Of Northern Aggression, Wilmington was North Carolina’s busiest seaport and largest city with a thriving German community and probably the reason Froelich chooses it for his home. He takes a job working at the Wilmington Button Manufactory where he is soon promoted as “Director” but the factory closes in the summer of 1861.

Not one to sit idle the highly skilled Froelich recognizes the need for arms and equipment the new Southern Government would need. He soon starts manufacturing quality edged weapons, such as Bowie Knifes, Swords, Pikes, and D-Handles. In September 1861 he partners with a Hungarian immigrant named Bela Estvan and they name there weapons manufacturing firm “Wilmington Sword Factory”. Although the circumstances surrounding their business connection remain unclear, Froelich apparently planned to produce the weapons while Estvan would handle sales and distribution.

Soon after opening the Wilmington Sword Factory they change the name to C.S.A. Arms Factory. The change perhaps reflects the owners concern that potential customers might mistakenly believe the Wilmington Sword Factory was limited to the manufacture of only swords. The change also reflected there devotion to the Confederate States of America. There loyalty apparently impressed the government in Richmond and led to a lucrative arms contract.

During the morning hours of February 1863 the Confederate States Armory catches fire and destroys the industrial complex. Shortly after he dissolves his partnership with Bela Estvan and relocates his armory in Kenansville, North Carolina.

In July 1863 the Union Army storms the town and burns the factory. Not one for giving up so quickly Froelich rebuilds and by November 1863 is producing edged weapons, knapsacks and accoutrements. He is financially troubled at this point due to relocation and fires but he continues to do whatever he can for the Southern Government.

After the war Froelich and his family become farmers, planting orchards of apples trees, pear trees, peach trees, plum, apricot and fig trees. Records show that the family had profits of $2663.25 from their agricultural pursuits in 1870. He must have been as good as a farmer as he was a businessman. Louis Froelich dies of consumption (tuberculosis) in Halifax County N.C. October 27,1873 at the age of 56.

Louis Froelich’s legacy as an arms maker to the Confederacy survives today. The Bavarian craftsman immigrated to America seeking a new life, only to find himself situated in the South as war breaks out. He took advantage of the opportunity to provide for his growing family by manufacturing the much needed weapons and equipment for North Carolina and Confederate Troops.

His skills as an industrial craftsman are evident in examples of his now scarce swords, sabers, bayonets, pikes and Bowie Knives. They were all of high quality and were widely used by the Army of Northern Virginia. For the duration of the war North Carolina armed and supplied its 125,000 troops more effectively than any other Southern State, in large part because of the efforts of independent industrialists like Louis Froelich.

So is everybody still with me? I’m hoping that you haven’t zoned out by now,lol…..

I have the pleasure of introducing the newest member of the Civil War Arsenal, which is a Artillery Short Sword sometimes referred to as a Kenansville D-Handle or D-Guard. It’s overall length is 21” long, the blade measures 15 ¾”. The spear point blade is about ¼” thick towards the center of the oval shaped cross section. The grip handle is made of walnut and the guards are of steel stock. The grip is basically round in shape except for a flattened area on either side running up about 3 ¼” up from the guard.

Scabbards are extremely rare especially ones with the leather throat belt loop still in tact. The example that we see here is far from complete but it is a survivor with probably about 65% of it intact. The leather they used for these knifes was usually poor quality which became brittle and cracked easy. The design flaw to this scabbard was the leather belt loop would rub against the D-Handle guard. Over time this would tear though the leather loop dropping it from the belt it was attached too hindering it useless.

So that just about does it for now, I hope you enjoy the photos and if you have any questions about this Knife or any of the other weapons in the Civil War Arsenal feel free to contact me.
Attn: Gene West civilwararsenal@yahoo.com

CS Star, Confederate Artillery Short Sword

Even though considered scarce this type Short Sword is one of the more common Confederate edged weapons.

These Short Sword are often reproduced so the buyer needs to beware, however there are many ways of identifying an authentic sword versus a reproduction. If you look closely at the handle you will clearly see the casting flaws. The star at the top of the pommel rarely has the five points you would normally see if it were perfect and even if one side did the other side wouldn’t. The CS on the guard at the base of the handle are barely readable. The handle is hollow and many have holes in them, some were even filled with lead. You’ll also see where the mechanics filed the rough edges.

The brass handles have a high copper content that’s often very noticeable. The blades are crude but cleaner in appearance then the handles, but all still have there flaws. There is a single nonstop fuller that’s about 13” long which is never straight. Believed by many to have been manufactured in Selma Alabama or Macon Georgia.

So that brings me to the next example in the Civil War Arsenal. The overall length of this Short Sword is 24 ½” long with a handle of 5 ½” and blade 19”. It weighs 2 ¾ lbs which would make it cumbersome to carry, especially on a long march with all the gear a foot soldier would have to carry.

Typical of many Confederate weapons you will never find two alike, but I believe that’s the beauty in them. Thanks for stopping by and if you have any questions about this Short Sword or any of the other weapons in the Civil War Arsenal email me at civilwararsenal@yahoo.com attn: Gene West

Richmond Lock Plates

Richmond Lock Plates come in a number of different types.

Type1: Would be the high hump lock plates that were stamped 1861 to the left of the hammer and Richmond, Va to the right side. These Richmonds were made before the Armory was transferred to the Confederate Government and were not stamped with the C.S. over the Richmond, Va. Unfortunately I do not have an example of this type of lock plate.

Type 2: Were similar too type 1( high humps) except they would be stamped with C.S. over Richmond, Va. indicating they were weapons that were made after the Armory was transferred to the Confederate Government.

Type 3: Lock plates were lock plates (high humps) that the hump on the plate was either cut or grinded down to allow the user to quickly insert and remove the primer, since the hump usually got in the way, slowing down the loading time of even the best foot soldier.

Type 4: Lock plates that used retooled dies and reconfigured the high hump design lock plate to what most call a low hump. These plates measure approximately 1 5/8″  from the top of the hump area of the lock plate to the bottom of the plate. This alteration was the design of William Wentzel, starting in about April of 1862 throughout the course of the war.

Richmond Rifle Musket, Lock Cavity

Clip Point D Guard Bowie Knife

Here’s a Confederate D Handle knife that’s been in my collection for quiet some time. It doesn’t get as much respect as some of the other D-handle knives due to its size, but it would have been the perfect knife for a foot soldier to carry since it was small and lighter in weight then most of the heavy and clumsy D-Handles.
The overall size of the knife is 15 ½” long, with the handle measuring 5” and the blade measuring 10 ½”. This Clip point Knife has a 2 ¾” false edge and the blade is 1 ½” wide. The Blacksmith kept the natural sweep of the blade which occurs when the edge is forged.
It’s my guess this knife was made from an old file, even though there are no teeth marks on the blade. It’s pretty simplistic in nature but still very well made. The Guard is thick at the pommel where it’s fastened to the handle (about 1/8”) but the area of the quillon where the blade meets the handle is very thin, measuring about 1/16” or thinner. Proof that the D-Handle was crafted with a hammer by a blacksmith or mechanic.
The blade and the guard both have a nice blackened patina to them however the ferrule at the base of the handle appears to be pewter, which may be the neatest feature of the knife. The scabbard is long gone to time but it’s my opinion it would have been leather or pigs hide.
Well there you have it another Confederate D-Handle Bowie Knife. If you have any questions about this knife or any of the other weapons in the Civil War Arsenal feel free to email me at civilwararsenal@yahoo.com attn: Gene West

Confederate Retractable Pikes

For the longest time I’ve been wanting and waiting for a Retractable Pike to become available that had all the characteristics that I demand for my collection. I’ve seen a few over the past years that drew my interest and curiosity but it wasn’t until I examined them that I realized they didn’t meet my expectations. So year after year, show after show it’s been one of those Southern Weapons that I’ve been on the hunt for but never could find that ONE that I could call mine.

As luck would have it I was on one of the more prominent Civil War Dealers web sites and low and behold their it was in all its glory, the retractable pike that said “I’m yours, buy me”. Interestingly enough there wasn’t just one pike to choose from there we’re two. One had a lighter wood finish, that may have been cleaned at some time and it had a shorter blade by about 2 inches. Then their was the pike that called to me.

This pike has a beautiful blackened wood and metal finish. Unlike so many of the pikes that I’ve handled over the years that always seemed to be missing a part or two or had cracks in the wood or a damaged blade, this pike was just stunning it wasn’t missing anything. It had all its hardware and a longer blade then most, which really drew my curiosity.

The pike has a spear point blade that’s extremely sharp. The shaft is six foot 1 inch long when the blade is in the closed position, the blade is 16 inches long and the pike has an overall length of 7 foot 5 inches when the blade is in the opened position.

The retractable pike was invented by Reverend Doctor Graves, a Methodist minister originally from Vermont, living in Georgia at the time of the war. Probably made in Macon Georgia these pikes were originally designed to have a spring that would eject the blade (kinda like a large stiletto or switchblade) to the open position however the South didn’t have the capabilities of making such a spring so they were made without them. The user would slide the bolt on the side to manually move the blade to open and closed position.

Georgia Governor Joseph Brown gave an address in February, 1862 appealing to the blacksmiths and mechanics throughout the state to show there patriotism and turn out ten thousand pikes to be six feet long and have an eighteen inch blade.

Suggesting that armies should be armed with pikes and a long heavy side knives and when advancing columns come within reach of the balls, let them move in double time and rush with terrible impetuosity into the lines of the enemy.

Governor Brown stated in his address that long range guns sometimes fail to fire and waste hundreds of balls to one that takes effect, but the short range pike and terrible knife when brought within their proper range, and wielded by a stalwarts patriots arm never fail to fire and never waste a single load.

There’s no doubt Gov. Browns intentions were good but I’m not fighting anyone who has a gun that shots lead with an accuracy of 500 yards if I’m only armed with a 6 foot pike. I Believe a Georgia Regiment almost committed mutiny when told they would have to fight with such a weapon. Can’t say I blame them.

So there you have it, yet another fine example of a Southern Edged Weapon. I hope you enjoy the photos if you have any questions about this weapon or any of the other weapons here at the Civil War Arsenal I can be reached at civilwararsenal@yahoo.com attn: Eugene West

Confederate, Joseph Brown Georgia Pike

The outbreak of the war left the the Southern states without much of the resources there Northern counterparts had. Rifles, pistols, swords, uniforms and least we forget people were just some of the needs lacking to fight a war. Because of this the ingenuity of the Southern war machine, i.e. politicians, blacksmiths, mechanics and farmers would have to think outside the box.

In February of 1862, Georgia Governor Joseph Brown gave an address to mechanics throughout the state.

Executive Department,
Milledgeville, Georgia,
February 20th, 1862.

To the Mechanics of Georgia:

The late reverses which have attended our arms, show the absolute necessity of renewed energy and determination on our part. We are left to choose between freedom at the end of a desperate and heroic struggle and submission to tyranny, followed by the most abject and degraded slavery to which a patriotic and generous people were ever exposed. Surely we can not hesitate. Independence or death should be the watchword and reply of every freeborn son of the South. Our enemies have vastly superior numbers and greatly the advantage in the quantity and quality of their arms. Including those, however, which have and will be imported, in spite of the blockade, we have guns enough in the Confederacy to arm a very large force, but not enough for all the troops which have been and must be called to the field. What shall be done in this emergency? I answer: Use the “Georgia Pike” with six feet staff, and the side knife eighteen inches blade, weighing about three pounds.

Let every army have a large reserve, armed with a good pike, and a long heavy side knife, to be brought upon the field, with a shout for victory, when the contending forced are much exhausted, or when the time comes for the charge of bayonets. When the advancing columns come within reach of the balls, let them move in double quick time and rush with terrible impetuosity into the lines of the enemy. Hand to hand, the pike has vastly the advantage of the bayonet, and those having the bayonet, which is itself but a crooked pike, with shorter staff, must retreat before it. When the retreat commences, let the pursuit be rapid, and if the enemy throw down their guns and are likely to outrun us, if need be, throw down the pike and keep close at their heels with the knife, till each man has hewed down, at least, one of his adversaries.

Had five thousand reserves thus armed and well trained to the use of these terrible weapons been brought to the charge at the proper time, who can say that the victory would not have been ours at Fort Donaldson?

But it was probably important that I state here the use to be made of that which I wish you to manufacture. I have already a considerable number of these pikes and knives, but I desire, within the next month, ten thousand more of each. I must have them; and I appeal to you, as one of the most patriotic classes of our fellow citizens, to make them for me immediately. I trust every mechanic, who has the means of turning them out rapidly, and the owner of every machine shop in this State, will at once lay aside, as far as possible, all other business and appropriate a month or two to the relief of the country in this emergency. Each workman who has the means of turning them out in large numbers without delay will be supplied with a proper pattern by application at the Ordinance Office at Milledgeville.

Appealing to your patriotism as a class and to your interest as citizens, whose all is at stake in the great contest in which we are engaged, I ask an immediate response.

In ancient times, that nation, it is said, usually extended its conquests furthest whose arms were shortest. Long range guns sometimes fail to fire and waste an hundred balls to one that takes effect; but the short range pike and the terrible knife, when brought within their proper range, ( as they can be almost in a moment) and wielded by a stalwart patriot’s arm, never fail to fire and never waste a single load.

I am, very respectfully, your fellow citizen,

After reading such a decree you can better understand the sentiment and feelings of the Southerner at the time of the war. The institutions have dumbed down the facts since the War of Northern Aggression with political correctness. But it’s obvious that the Southerner was defending his freedoms, they were fighting the second revolution the same fight there Grandfathers had fought some 80 years earlier against the British.

Calling for mechanics throughout the state to make six foot staffs with eighteen inch blades shows just how desperate the Southern war machine was. Still thinking in terms of a Napoleonic type war, where armies lined up in open fields with smooth bore rifles and blades of all types believing a Divine Spirit was on there side and would protect them the sorrows of death.

There Northern counterparts were manufacturing state of the art breech loading repeating carbines and rifles, rifled cannons that could launch explosive projectiles accurately for miles, building the largest wartime Navy the world had ever seen.

Seems hard to believe that these two countries/armies could have been fighting against each other with such a difference in the types of weapons they hoped would bring them victory. It’s a credit to the South that the war lasted as long as it did, just goes to show how difficult it is to strip someone of there freedom without them fighting back like a caged rabbit dog, after all they were willing to use pikes against men with guns, sounds crazy too me.

Which brings me to the next weapon in the Civil War Arsenal. This Joseph Brown Georgia Pike has a spear point blade that measures 12 ¼” long, the overall length of the pike is 8’ & ¼” from the butt to the point of the blade. It has no cracks in the wood shaft and no makers marks, which is not uncommon for these pikes. The brass butt collar at the base of the shaft is still in place, which is generally lost on most examples. The wood shaft has what appears to be the markings ( indentations ) of rope that was once wrapped around it. I’ve seen this before on other pikes and it’s my opinion that the shaft was wrapped with rope to better grasp for lungeing forward. However I’ve never seen a pike with the rope still in place. This pike was purchased from Sam, at the Horse Soldiers store in Gettysburg Pa. I’m guessing due to its great condition it was a war souvenir shipped north after the war and displayed at a G.A.R hall, just an educated guess.

So there you have it another fine example of a Southern Edged Weapon in the ever growing Civil War Arsenal, a Confederate Georgia Pike. If you have any questions about this weapon feel free to contact me. And if you have a civil war weapon that you’d like know more about or perhaps you’d like to sell feel free to contact me at civilwararsenal@yahoo.com , attn: Eugene West. Thanks for stopping by.

Civil War Guns

Sitting around the house today not knowing what to do, outside the snow is coming down and there calling this the storm of the century with up to 2 feet of snow and 50 MPH winds expected, sounds cold to me….

Anyway I decided to take some photos of my history room, a.k.a. the “Civil War Arsenal”. As you can see many of my antique weapons are displayed throughout the room. I recently had a carpenter build the racks that the rifles are mounted on, all in all I think the racks came out pretty nice and compliment the rifles and corresponding bayonets.

You’ll also notice some D-Handle, Side Knives, Pikes and Artillery Swords displayed as well. Its my opinion that these weapons should be displayed so friends and family can see and handle them. I don’t quite get the fun in collecting antique guns and swords then putting them in the safe or some out of the way place where no one can appreciate them. But thats just my opinion and you know what they say about opinions.

Also scattered throughout the room are a number of paintings, historical photos, bronze castings and dozens of other historical items. You’ll notice that I am a big “John Paul Strain” fan he is perhaps one of the best artist in his field I have a bunch of his paintings. I also have some of “Karl Anderson’s” sculptures, he’s a less know artist then John however just as good and I believe the best in his field, especially when it comes to historical accuracy.

Well there you have it, another story that no one will read. Just Kidding…. If you have any questions about this post or any of the weapons in the “Civil War Arsenal” feel free to contact me at civilwararsenal@yahoo.com attn: Gene West