Category Archives: Antique Guns

1862 Enfield, P-1853 Type III Rifle Musket

Posted on by
23

Over the last bunch of weeks I’ve written about many of the domestic weapons in my Civil War Arsenal, but today I’m going to write about one of my imports muskets. The 1853 Type III Enfield was the most common imported weapon of the Civil War. Both the North and South imported this weapon to the tune of 900,000 from 1861 to 1865.

At the outbreak of the war the Enfield was considered the rifle of choice. The Enfield was the first production gun to use rifling in its barrel and it fired the .577 caliber Pritchett minie ball (which was innovative for its time) and considered by many the prettiest rifle made with its brass accents.

There were many private contractors manufacturing Enfield’s but the better quality Enfield’s were made by the Birmingham Small Arms Factory and the London Armory Arsenals. The reason for this was that these two companies made muskets that had interchangeable parts, the dozens of other gun making companies made muskets that looked the same but the parts would not interchange from one gun to the other. This did not fare well in battle, as one musket failed you could not take parts from another and fix it.

So that takes us to the 1862 Enfield in my Civil War Arsenal. I purchased this musket a few years back on Gun Brokers Auction Web Site. The fellow that was auctioning musket did not know much about it, other then it was old. He was selling off a collection of antique weapons for someone. When I first saw the gun I thought there was no way I’d win the auction, thinking that everyone interested would be jockeying for position. However I did have the winning bid and I think I got it for a great price.

This Enfield is super clean with hardly a mark on it. The stock is absolutely stunning with its tiger wood finish and the barrel and hardware are almost flawless. It has the Birmingham stamp on the right side of the stock with the maker’s name of Joseph Wilson. On the top of the stock by the tang of the butt plate is the stamp of Schuyler Hartley and Graham, or SH over G3. I think 3 and 5 are the most common numbers found on these imports with 1, 2, 4 being less common.

Schuyler Hartley and Graham had Military Goods, stores in N.Y.C. at 19 Maiden Lane and 22 John Street, and are considered by many to be the first store to sell Military accessories, kind of like a modern day Army Navy store.

Because they already had connections overseas as buyers of military accessories the U.S. Government and State Governments turned towards them to purchase weapons (rifles, pistols, swords, etc…). Most of the Enfield’s they purchased were bought for the State Militia’s of Massachusetts and New York.
However some of the weapons that S.H & G sold were sold over the counter to soldiers who wanted better equipment then the Government was issuing, and all officers were required to purchase their own uniforms and swords, so during the war S.H.& G. was the perfect tool for soldiers and officers alike to purchase quality weapons and accessories.

But we know this Musket wasn’t purchased by a soldier over the counter. First of all if a soldier wanted to upgrade his Government Issue weapon he would have bought a breech loading rifle or carbine. But the most telling sign is the Government cartouche on the left side of the stock, which tells us this was imported by S.H. & G for the U.S. Government, very neat stuff. I love it when the markings on the weapon tell the story.

This Enfield is a beauty I hope you enjoy it as much as I do.
Any questions about this posting or any of the other postings at the Civil War Arsenal feel free to contact me at civilwararsenal@yahoo.com attm: Gene West

1862 Sharps & Hankins Naval Carbine

Posted on by
8

First I must apologize for my spelling errors. It seems as though in my rush to enter content my grammar and spelling haven’t been as good as they should. I find myself wanting to add information as quickly as possible and in my haste I’m making errors, I’m sorry I’ll try to do better.

So on to the next weapon in my Civil War Arsenal. I’ve been of the fence as to which weapon I’d write about next, so I decided to write about the New Model 1862 Sharp & Hankins Naval Carbine.

Christian Sharps left the Sharps Rifle Company in 1853 and started his own company. He needed capital to expand his operation so he brought in partners Ira B. Ebby and Natan H. Bolles. The Companies name was C. Sharps & Company.

In 1860 William C. Hankins, a wood maker by trade joined the firm as superintendent of the rifle works. He brought additional capital to the business, which was greatly needed. In 1861 Ira and Nathan left the firm, the following year William became a full partner. In 1863 the Company’s name was changed to Sharps & Hankins.

The Sharps & Hankins Carbine contained a number of “firsts” in the military field.

1. The separate firing pin within the receiver.

2. Hammer safety mechanism, this kept the hammer face from contacting the firing pin.

3. Extractor system, a spring loaded catch in the frame extracts the cartridge and also prevents the forward movement of the cartridge case when the breech is open.

The Sharps & Hankins Carbine used a 52 – 56 rimfire cartridge with the later carbines chambered for Spencer rimfire cartridges. It had a 800 yard graduated rear sight with a walnut stock the overall length of the carbine is 38 5/8”long and the Barrel is 23 5/8”long. But perhaps the strangest thing about this weapon is that it has a leather sleeve that fits over the barrel and is fastened at the breech. Because this was designed for Naval use it was thought that the leather would prevent the barrel from rusting from exposure to salt water, however they found that when the leather got wet it held the water (like a sponge) and rusted the barrel, part of the learning curve of the industrial revolution I guess.

They actually made a Calvary version of this Carbine without the leather sleeve over the barrel. This carbine measured a total of 33 ½ “with the barrel length of 18 ¾”. It had a sling ring on the left side of the breech so the cavalrymen could attach it to there harness.

About 6200 of these were made throughout the war at a cost of $25.00 each. There were only a handful (600 I think) of the Calvary version made.

The one you see here is a 1900 serial # and is in good condition. Most of the bluing has worn off but it has no rust on it. The leather is in very good condition but may have been replaced at some time. On most of these Navy Carbines the leather sleeve is in poor condition or even missing

The Sharps & Hankins Co. closed its doors in 1867 and all guns were sold off by 1868. William Hankins left the firm early 1867 and the Company changed its name to C. Sharps & Co.

Christian Sharps (who by the way patented the breech mechanism on the Sharps Carbine) died of tuberculosis on March 12, 1874 his estate was valued at $341.25.

1864 Burnside Carbine, Fourth Model

Posted on by
9

The Burnside Carbine was invented by Ambrose Everett Burnside, born in Liberty Indiana May 23, 1824. He graduated Unites States Military West Point Academy in 1847 and became a Lieutenant of Artillery. He fought towards the end of the Mexican American War. He resigned from the Military in 1853 and organized the Bristol Fire Arms Co. in 1855. Burnside developed a breech loading idea and patented in 1856, U.S. Patent # 14,491.

In April 1856 he sold 200 Carbines to the Government. The following year it was rated the best breech loading weapons of the weapons tested. In September 1858 he sold another 709 Carbines to the Gov. for $35.00 each.

A further trail board was conducted in 1860 to test various breech loading carbines. The Board concluded that although the Burnside was capable of rendering good service, it does not consider it equal to Smiths and Maynard’s to Military Service.

At the outbreak of the war Everett Burnside was no longer associated with the Bristol Fire Arms Co. He had gone bankrupt and sold off the Patents to pay his creditors. He becomes Major General and leads the Army of the Potomac during the Fredericksburg campaign in the winter of 62, if your reading this article I’ll assume you know what happens, it wasn’t pretty.

So back to the Carbines, the U.S. Government purchased 53,031 Carbines and 21,819,200 cartridges throughout the the war. The earlier Models of the Burnside Carbines had a Walnut Stock, Breech Mechanism and a barrel with no wood forearm. However in 1864 the Forth Model was designed with a 14” wood forearm held to the barrel with a single barrel band. This allowed for better sighting and allowed the shooter to handle the barrel without getting burnt.

During the 1863-64 Ordinance Department survey of breech loading carbines, 185 officers were polled on the Burnside, with the following results. Best 17; Good 125; Fair; 12 Poor 28: and 3 considered it useless, far cry from the Maynard Survey. It makes me wonder why the Government purchased more Burnsides then Maynard’s. Go read my article on Maynard Carbines if you’re confused.

So that brings us to my next example of a Civil War Weapon. The Burnside that you see here is in excellent condition. I purchase this from a gun auction a couple years ago. It has a Government cartouche on the left side of the stock, some bluing still on the lever mechanism and a serial # in the 16,000’s. Overall this is a fine example of a Fourth Model Burnside Carbine.

Many thanks to John D. McAulay and his book Carbines of the Civil War. Thanks for the history, and the ones who are passionate enough to document it.
Any questions contact Eugene West at civilwararsenal@yahoo.com

1863 Maynard Carbine

Posted on by
21

Let’s talk Civil War Carbines, in particular the Second Model Maynard Carbine, a.k.a. Model 1863 Maynard Carbine. Manufactured c. 1863-65; total about 20,202 (I’ll talk about this number later), 50 Caliber, no patchbox, and has a thinner butt plate then the First Model. Manufactured by Mass. Arms Co. / Chicopee Falls. Unlike the First Models this Model is without the tape primer and tang sight. Thiers a sling ring and cartouche on the left side of the stock.

Many of these Carbines were issued to Union Calvary from the 9th and 11th Indiana and the 11th Tennessee. Many of these Carbines are seen in very good condition since most were issued late in the war and many saw little or no service. Many laid in arsenals until the government sold them off in the late 1860’s.

The Maynard Carbine’s are considered one of the best performing and most accurate carbines of the Civil War era. In John D. McAulay,s book “Carbines of the Civil War” he writes in October of 1859 the Navy conducted test firing on the Maynard Carbine at the Washington Navy Yard. Dr. Maynard personally fired a .50 caliber Maynard for the test. A 3×6 foot target was placed at 200 yards, and 237 rounds were fired without a miss. The rate of firing was at 12 rounds per minute. One Maynard was fired 562 times before cleaning. Two of the metallic cartridges were reloaded and fired 200 times and found to still be serviceable.

I would say that’s a Five Star Review of this weapon. With the exception of the Sharps and Spencer it’s my opinion this may have been the best and most reliable Carbine issued during the Civil War. I would have no objections to using this as my primary weapon, back in the day. How about you? The First Model Maynard carbines were manufactured in .35 and .50 Caliber and many of those weapons were purchased by Southern States at the outbreak of the war. So many were purchased that in the Confederate Arms Guide the Maynard was shown as a weapon.

So that brings us to yet another Weapon in my Civil War Arsenal. This 1863 Maynard has 2 government cartouches on the left side of the stock. Most of the bluing is worn off the barrel but no rust or cracks in the stock. This was the first CW weapon I purchased and even though I’ve made some bad purchases over the years, this was a good one considering it was my first, anyone collecting CW stuff knows what I mean.

I guess the most unusual thing about this Carbine is the serial no. is in the 22,000 range, it has government cartouches. Like I said earlier in John D. McAulay’s book “Carbines of the Civil War” 20,002 carbines were procured by the government and Norm Flayderman , documents 20,202 carbines manufactured in his book “Guide to Antique American Firearms” so that makes me question the facts or the lack of. Either way the US Government paid $24.20 for each Carbine and 2,157,000 Maynard Cartridges were bought at a cost of $72,207.50.
If you have any questions contact Eugene West at civilwararsenal@yahoo.com

1858 Harpers Ferry Rifle Musket

Posted on by
25

The newest weapon in the Civil War Arsenal is an Harpers Ferry U.S. Model-1855 Rifle Musket. I’ve been looking for a 1855 Model Harpers Ferry in fine condition for some time now without and luck. Then recently Tim Prince from College Hill Arsenal listed this beauty. Within minutes I was on the phone with him negotiating a deal. The Springfield and Harpers Ferry Arsenals made 59,273 of these rifle-muskets, with the Harpers Ferry Arsenal making a total of 12,158. Because of the Confederates capturing of the Harper’s Ferry Armory in April of 1861 many of the standing weapons were captured and or destroyed by fire leaving us with few good (Harpers Ferry) examples to examine and study.

What makes this weapon so unique is the Maynard Tape Primer designed by “Edward Maynard” for more rapid firing of the weapon. Dr. Edward Maynard, a dentist with an interest in firearms, embedded tiny pellets of priming material in thin strips of paper, then glued a second strip of paper on top of the first, creating a “tape” of primer (similar to a cap gun you would have played with as a child). The tape could be manufactured quickly and cheaply, since paper was much less expensive than copper. Maynard also developed an automatic feeding system that would advance the tape when the musket’s hammer was cocked. The hammer not only detonated the primer, but would also automatically cut the paper, thus removing the spent portion of the primer tape. The system worked well under controlled circumstances but proved to be unreliable in the field. The tape was delicate and would tear but the biggest problem was the paper strips were susceptible to adverse weather and even humidity.

This model proved one of the staple arms of the Civil War, and was the first U.S. martial arm firing the Minie bullet in .58 caliber.

This example is an early model (Type 1) because of the long base adjustable rear sight, similar to the 1853 Enfield’s, brass nose cap and the lack of a patch box.

If you have any questions about this weapon or any of the other weapons in the Civil War Arsenal feel free to contact me at civilwararsenal@yahoo.com attn: Gene West

1862 Richmond Carbine

Posted on by
Reply

It was the Fall of 1862 and the South was struggling to keep pace with their Northern counterpart. The Northern government and private contractors were manufacturing about 50,000 long and small arms a month, while in the South the two government armories in Richmond, Virginia and Fayetteville, North Carolina were struggling to piece together 2000 usable weapons a month, I say piece together because many of the Musket Rifles were made from parts captured at the Harpers Ferry Arsenal or from battlefield pickups.

Fast forward 150 years, I’m at the Civil War Gun Show at Gettysburg Pa. hoping to find the Confederate Carbine that’s on my wish list. I’m with my wife (Melinda) and her instructions are to help me find a Richmond Carbine and negotiate a price, which is her expertise. It seems as though non collectors don’t have an emotional connection so there not as likely to over pay for the item there negotiating for. So were walking up and down the aisles and there’s a few OK carbines but there in bad to poor condition and I had my heart set on a cleaner version. When finally there it is the Holy Grail of Carbines, an 1862 Richmond Virginia Low Hump Carbine in good condition. I break down the Carbine hoping that it’s historically accurate. First the lock plate then the barrel next the stock and it seems to be 100% correct. The metal all of which is Southern made (except one barrel band and the butt plate) is got a brown patina (not rust) that is smooth to the touch the barrel has a front pinched sight, the hammer is southern made everything is what you hope to find in an early model Richmond Carbine. The stock is probably the neatest of all the features the carbine has to offer.  The stock is split into 2 pieces under the barrel band closest to the lock plate and there are 2 staples holding it together. I’ve read about these types of Confederate guns and I’ve even seen a few in books but I had never held one.

So to make a long story short I fall in love with the Carbine and my wife works here magic negotiating the best price possible while I’m salivating in the next aisle of the show, I went to the next aisle because I didn’t want to show my hand to the seller who might not have moved off his price.

We spend the rest of the weekend in Gettysburg doing battlefield exploration type stuff, having dinner, drinks and the best pretzels I’ve ever eaten at the Irish Pub. Mean while I can’t wait to get home break down my new Carbine and study it from top to bottom.

We finally get home and there I go taking my new toy apart hoping to find what nobody else was able to find. I use gun oil to clean everything hoping it may reveal that one thing that everyone else missed and low and behold there it is on the left side of the stock  a name carved (ever so likely)into the wood, John Taylor.

So then it becomes my mission to learn more about John William Taylor. It turns out John Enlisted April 21st 1861 in Stafford Virginia, roster of the 9th Virginia Cavalry, Company A and served for the duration of the war. We know that all the Carbines made at the Richmond Armory were issued to Virginia Cavalrymen; we know John was promoted to Cpl. Early 1863 which should have given him leverage in getting issued the Carbine.  So it’s fair to say that This John William Taylor carried this Carbine, HOW NEAT IS THAT!

John William Taylor

John William Taylor Tin Type

This is just one of the many Civil War stories I’m hoping to share with anyone willing to listen and I encourage you to tell one of your neat stories about Civil War finds and artifacts.
If you have any thoughts or questions please contact Eugene West at civilwararsenal@yahoo.com